On Wed, 3 Jul 2024 at 15:15, Bibek Kumar Patro
<quic_bibekkum@xxxxxxxxxxx> wrote:
>
>
>
> On 7/2/2024 12:04 AM, Dmitry Baryshkov wrote:
> > On Fri, Jun 28, 2024 at 07:34:33PM GMT, Bibek Kumar Patro wrote:
> >> Add ACTLR data table for SM8550 along with support for
> >> same including SM8550 specific implementation operations.
> >>
> >> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
> >> ---
> >> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 89 ++++++++++++++++++++++
> >> 1 file changed, 89 insertions(+)
> >>
> >> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> >> index 77c9abffe07d..b4521471ffe9 100644
> >> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> >> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> >> @@ -23,6 +23,85 @@
> >>
> >> #define CPRE (1 << 1)
> >> #define CMTLB (1 << 0)
> >> +#define PREFETCH_SHIFT 8
> >> +#define PREFETCH_DEFAULT 0
> >> +#define PREFETCH_SHALLOW (1 << PREFETCH_SHIFT)
> >> +#define PREFETCH_MODERATE (2 << PREFETCH_SHIFT)
> >> +#define PREFETCH_DEEP (3 << PREFETCH_SHIFT)
> >> +
> >> +static const struct actlr_config sm8550_apps_actlr_cfg[] = {
> >> + { 0x18a0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x18e0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x0800, 0x0020, PREFETCH_DEFAULT | CMTLB },
> >> + { 0x1800, 0x00c0, PREFETCH_DEFAULT | CMTLB },
> >> + { 0x1820, 0x0000, PREFETCH_DEFAULT | CMTLB },
> >> + { 0x1860, 0x0000, PREFETCH_DEFAULT | CMTLB },
> >> + { 0x0c01, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >
> > - Please keep the list sorted
>
> Sure Dmitry, will sort this list in reverse-christmas-tree order
> in next iteration. Thanks for this input.
Why? Just sort basing on SID.
>
> > - Please comment, which devices use these settings.
>
> As discussed in earlier versions of this patch, these table entries
> are kind of just blind values for SMMU device, where SMMU do not have
> idea on which SID belong to which client. During probe time when the
> clients' Stream-ID has corresponding ACTLR entry then the driver would
> set value in register.
> Also some might have their prefetch settings as proprietary.
> Hence did not add the comments for device using these settings.
Please mention devices that are going to use the SIDs.
>
>
> Thanks & regards,
> Bibek
>
> >
> >> + { 0x0c02, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c03, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c04, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c05, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c06, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c07, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c08, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c09, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c0c, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c0d, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c0e, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x0c0f, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1961, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1962, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1963, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1964, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1965, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1966, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1967, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1968, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1969, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x196c, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x196d, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x196e, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x196f, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c1, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c2, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c3, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c4, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c5, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c6, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c7, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c8, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19c9, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19cc, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19cd, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19ce, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x19cf, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> >> + { 0x1c00, 0x0002, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1c01, 0x0000, PREFETCH_DEFAULT | CMTLB },
> >> + { 0x1920, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1923, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1924, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1940, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1941, 0x0004, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1943, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1944, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> + { 0x1947, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> >> +};
> >> +
> >> +static const struct actlr_config sm8550_gfx_actlr_cfg[] = {
> >> + { 0x0000, 0x03ff, PREFETCH_DEEP | CPRE | CMTLB },
> >> +};
> >> +
> >> +static const struct actlr_variant sm8550_actlr[] = {
> >> + {
> >> + .io_start = 0x15000000,
> >> + .actlrcfg = sm8550_apps_actlr_cfg,
> >> + .num_actlrcfg = ARRAY_SIZE(sm8550_apps_actlr_cfg)
> >> + }, {
> >> + .io_start = 0x03da0000,
> >> + .actlrcfg = sm8550_gfx_actlr_cfg,
> >> + .num_actlrcfg = ARRAY_SIZE(sm8550_gfx_actlr_cfg)
> >> + },
> >> +};
> >>
> >> static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
> >> {
> >> @@ -606,6 +685,15 @@ static const struct qcom_smmu_match_data sdm845_smmu_500_data = {
> >> /* Also no debug configuration. */
> >> };
> >>
> >> +
> >> +static const struct qcom_smmu_match_data sm8550_smmu_500_impl0_data = {
> >> + .impl = &qcom_smmu_500_impl,
> >> + .adreno_impl = &qcom_adreno_smmu_500_impl,
> >> + .cfg = &qcom_smmu_impl0_cfg,
> >> + .actlrvar = sm8550_actlr,
> >> + .num_smmu = ARRAY_SIZE(sm8550_actlr),
> >> +};
> >> +
> >> static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
> >> .impl = &qcom_smmu_500_impl,
> >> .adreno_impl = &qcom_adreno_smmu_500_impl,
> >> @@ -640,6 +728,7 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
> >> { .compatible = "qcom,sm8250-smmu-500", .data = &qcom_smmu_500_impl0_data },
> >> { .compatible = "qcom,sm8350-smmu-500", .data = &qcom_smmu_500_impl0_data },
> >> { .compatible = "qcom,sm8450-smmu-500", .data = &qcom_smmu_500_impl0_data },
> >> + { .compatible = "qcom,sm8550-smmu-500", .data = &sm8550_smmu_500_impl0_data },
> >> { .compatible = "qcom,smmu-500", .data = &qcom_smmu_500_impl0_data },
> >> { }
> >> };
> >> --
> >> 2.34.1
> >>
> >
--
With best wishes
Dmitry
