[PATCH v4 09/10] dt-bindings: opp: v2-qcom-level: Update minItems for oloop-vadj & cloop-vadj

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since IPQ9574 has only one CPR thread it will specify
only one voltage adjustment value. Hence update min items
accordingly for oloop-vadj and cloop-vadj. Without
constraining min items, dt_binding_check gives errors

	opp-table-cpr4:opp-0:qcom,opp-cloop-vadj:0: [0] is too short
	opp-table-cpr4:opp-0:qcom,opp-oloop-vadj:0: [0] is too short

	Failed validating 'minItems' in schema . . .
		{'maxItems': 2, 'minItems': 2}

Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
v4: Fix dt_bindings_check error
---
 Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
index b203ea01b17a..1c1a9e12d57a 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -39,6 +39,7 @@ patternProperties:
           An array of per-thread values representing the closed-loop
           voltage adjustment value associated with this OPP node.
         $ref: /schemas/types.yaml#/definitions/int32-array
+        minItems: 1
         maxItems: 2
 
       qcom,opp-oloop-vadj:
@@ -46,6 +47,7 @@ patternProperties:
           An array of per-thread values representing the open-loop
           voltage adjustment value associated with this OPP node.
         $ref: /schemas/types.yaml#/definitions/int32-array
+        minItems: 1
         maxItems: 2
 
     required:
-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux