On Wed, Jun 26, 2024 at 1:24 AM Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx> wrote:
>
> On Mon, Jun 24, 2024 at 03:53:48PM +0200, Konrad Dybcio wrote:
> >
> >
> > On 6/23/24 13:06, Akhil P Oommen wrote:
> > > Add support in drm/msm driver for the Adreno X185 gpu found in
> > > Snapdragon X1 Elite chipset.
> > >
> > > Signed-off-by: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
> > > ---
> > >
> > > drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 19 +++++++++++++++----
> > > drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 ++----
> > > drivers/gpu/drm/msm/adreno/adreno_device.c | 14 ++++++++++++++
> > > drivers/gpu/drm/msm/adreno/adreno_gpu.h | 5 +++++
> > > 4 files changed, 36 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > > index 0e3dfd4c2bc8..168a4bddfaf2 100644
> > > --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > > +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > > @@ -830,8 +830,10 @@ static int a6xx_gmu_fw_start(struct a6xx_gmu *gmu, unsigned int state)
> > > */
> > > gmu_write(gmu, REG_A6XX_GMU_CM3_CFG, 0x4052);
> > > + if (adreno_is_x185(adreno_gpu)) {
> > > + chipid = 0x7050001;
> >
> > What's wrong with using the logic below?
>
> patchid is BITS(7, 0), not (15, 8) in the case of x185. Due to the
> changes in the chipid scheme within the a7x family, this is a bit
> confusing. I will try to improve here in another series.
I'm thinking we should just add gmu_chipid to struct a6xx_info, tbh
Maybe to start with, we can fall back to the existing logic if
a6xx_info::gmu_chipid is zero so we don't have to add it for _every_
a6xx/a7xx
BR,
-R
> >
> > > /* NOTE: A730 may also fall in this if-condition with a future GMU fw update. */
> > > - if (adreno_is_a7xx(adreno_gpu) && !adreno_is_a730(adreno_gpu)) {
> > > + } else if (adreno_is_a7xx(adreno_gpu) && !adreno_is_a730(adreno_gpu)) {
> > > /* A7xx GPUs have obfuscated chip IDs. Use constant maj = 7 */
> > > chipid = FIELD_PREP(GENMASK(31, 24), 0x7);
> > > @@ -1329,9 +1331,18 @@ static int a6xx_gmu_rpmh_arc_votes_init(struct device *dev, u32 *votes,
> > > if (!pri_count)
> > > return -EINVAL;
> > > - sec = cmd_db_read_aux_data("mx.lvl", &sec_count);
> > > - if (IS_ERR(sec))
> > > - return PTR_ERR(sec);
> > > + /*
> > > + * Some targets have a separate gfx mxc rail. So try to read that first and then fall back
> > > + * to regular mx rail if it is missing
> > > + */
> > > + sec = cmd_db_read_aux_data("gmxc.lvl", &sec_count);
> > > + if (PTR_ERR_OR_ZERO(sec) == -EPROBE_DEFER) {
> > > + return -EPROBE_DEFER;
> > > + } else if (IS_ERR(sec)) {
> > > + sec = cmd_db_read_aux_data("mx.lvl", &sec_count);
> > > + if (IS_ERR(sec))
> > > + return PTR_ERR(sec);
> > > + }
> >
> > I assume GMXC would always be used if present, although please use the
> > approach Dmitry suggested
>
> Correct.
>
> -Akhil
> >
> >
> > The rest looks good!
> >
> > Konrad
