[PATCH v2 7/8] Add debug log info to vfe block init and set clock rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: George Chan <gchan9527@xxxxxxxxx>

Print out missing clock's name when doing msm_vfe_subdev_init().
Also print out min clock rate required at vfe_set_clock_rates().

Signed-off-by: George Chan <gchan9527@xxxxxxxxx>
---
 drivers/media/platform/qcom/camss/camss-vfe.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 05fa1adc1661..fbbf38755c0e 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -579,7 +579,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
 
 			if (j == clock->nfreqs) {
 				dev_err(dev,
-					"Pixel clock is too high for VFE");
+					"Pixel clock(%s) is too high for VFE, at least set to %lld",
+					 clock->name, min_rate);
 				return -EINVAL;
 			}
 
@@ -1452,8 +1453,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 		struct camss_clock *clock = &vfe->clock[i];
 
 		clock->clk = devm_clk_get(dev, res->clock[i]);
-		if (IS_ERR(clock->clk))
+		if (IS_ERR(clock->clk)) {
+			dev_err(dev, "missing clk %s", res->clock[i]);
 			return PTR_ERR(clock->clk);
+		}
 
 		clock->name = res->clock[i];
 

-- 
2.34.1






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux