[PATCH v2 0/8] Add sc7180 camss subsys support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone.
This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces.

Since SM7125 is a low-speed variant of SC7180, SC7180 testers please
take a look and have a test as well.

sc7180 provides

- 2 x VFE
- 1 x VFE Lite
- 2 x CSID
- 1 x CSID Lite
- 4 x CSI PHY

The sc7180-camss binding should be comaptible with sdm845 yaml.
I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and
put new maintainer information. If this is not desirable then i can add binding to
existing sdm845 yaml instead.

In addition, a bootable tree of sm7125/joyeuse is availble at:
https://github.com/99degree/linux/tree/camss
  

Signed-off-by: George Chan <gchan9527@xxxxxxxxx>
---
Changes in v2:
- Revised dt-binding as stated by krzk
- Added dt-binding item power-domain-name as stated by Bryan
- Combine patch #2 and #3 as stated by krzk and Bryan
- Split eror-print log for clk name from patch #5 as suggested by Konrad
- Reformat dt-node of camss as stated by krzk
- Corrected phy init sequence for v1.2.2 as spot by Bryan
- Added 3 more debug info for missing clk and low clk-rate issue.
- Adding port info to ports sub-node
- Adding required-opps node to dt
- Link to v1: https://lore.kernel.org/r/20240621-b4-sc7180-camss-v1-0-14937929f30e@xxxxxxxxx

---
George Chan (8):
      Add qcom,sc7180-camss
      Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
      Add sc7180 support
      Add sc7180 resources
      Add debug log info to camss_enable_clocks function
      Add debug log info to msm_csid_subdev_init function
      Add debug log info to vfe block init and set clock rate
      [RFT]Add support for sc7180 camss subsys

 .../bindings/media/qcom,sc7180-camss.yaml          | 327 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               | 135 +++++++++
 drivers/media/platform/qcom/camss/camss-csid.c     |   4 +-
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 135 +++++++++
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 drivers/media/platform/qcom/camss/camss-vfe.c      |  10 +-
 drivers/media/platform/qcom/camss/camss-video.c    |   1 +
 drivers/media/platform/qcom/camss/camss.c          | 218 +++++++++++++-
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 9 files changed, 828 insertions(+), 4 deletions(-)
---
base-commit: 2102cb0d050d34d50b9642a3a50861787527e922
change-id: 20240621-b4-sc7180-camss-cddc6b60a9b4

Best regards,
-- 
George Chan <gchan9527@xxxxxxxxx>






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux