[no subject]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[1] https://lore.kernel.org/linux-pci/f42559f5-9d4c-4667-bf0e-7abfd9983c36@xxxxxxxxxxx/

> When a memory region which is located above the SLV_ADDR_SPACE_SIZE
> boundary is used for BAR region then there could be an overlap of DBI and
> ATU address space that is getting mirrored and the BAR region. This
> results in DBI and ATU address space contents getting updated when a PCIe
> function driver tries updating the BAR/MMIO memory region. Reference
> memory map of the PCIe memory region with DBI and ATU address space
> overlapping BAR region is as below.
> 
> 			|---------------|
> 			|		|
> 			|		|
> 	-------	--------|---------------|
> 	   |	   |	|---------------|
> 	   |	   |	|	DBI	|
> 	   |	   |	|---------------|---->DBI_BASE_ADDR
> 	   |	   |	|		|
> 	   |	   |	|		|
> 	   |	PCIe	|		|---->2*SLV_ADDR_SPACE_SIZE
> 	   |	BAR/MMIO|---------------|
> 	   |	Region	|	ATU	|
> 	   |	   |	|---------------|---->ATU_BASE_ADDR
> 	   |	   |	|		|
> 	PCIe	   |	|---------------|
> 	Memory	   |	|	DBI	|
> 	Region	   |	|---------------|---->DBI_BASE_ADDR
> 	   |	   |	|		|
> 	   |	--------|		|
> 	   |		|		|---->SLV_ADDR_SPACE_SIZE
> 	   |		|---------------|
> 	   |		|	ATU	|
> 	   |		|---------------|---->ATU_BASE_ADDR
> 	   |		|		|
> 	   |		|---------------|
> 	   |		|	DBI	|
> 	   |		|---------------|---->DBI_BASE_ADDR
> 	   |		|		|
> 	   |		|		|
> 	----------------|---------------|
> 			|		|
> 			|		|
> 			|		|
> 			|---------------|
> 
> Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not
> used for BAR region which is why the above mentioned issue is not
> encountered. This issue is discovered as part of internal testing when we
> tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence
> we are trying to fix this.
> 

I don't quite understand this. PoR value of SLV_ADDR_SPACE_SIZE is 16MB and most
of the platforms have the size of whole PCIe region defined in DT as 512MB
(registers + I/O + MEM). So the range is already crossing the
SLV_ADDR_SPACE_SIZE boundary.

Ironically, the patch I pointed out above changes the value of this register as
128MB, and the PCIe region size of that platform is also 128MB. The author of
that patch pointed out that if the SLV_ADDR_SPACE_SIZE is set to 256MB, then
they are seeing enumeration failures. If we go by your description of that
register, the SLV_ADDR_SPACE_SIZE of 256MB should be > PCIe region size of
128MB. So they should not see any issues, right?

> As PARF hardware block mirrors DBI and ATU register space after every
> PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, write
> U64_MAX to PARF_SLV_ADDR_SPACE_SIZE register to avoid mirroring DBI and
> ATU to BAR/MMIO region.

Looks like you are trying to avoid this mirroring on a whole. First of all, what
is the reasoning behind this mirroring?

> Write the physical base address of DBI and ATU
> register blocks to PARF_DBI_BASE_ADDR (default 0x0) and PARF_ATU_BASE_ADDR
> (default 0x1000) respectively to make sure DBI and ATU blocks are at
> expected memory locations.
> 

Why is this needed? Some configs in this driver writes 0 to PARF_DBI_BASE_ADDR.
Does the hardware doesn't know where the registers are located?

> Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 40 ++++++++++++++++++++++----
>  1 file changed, 35 insertions(+), 5 deletions(-)
> 
> Tested:
> - Validated NVME functionality with PCIe6a on x1e80100 platform.
> - Validated WiFi functionality with PCIe4 on x1e80100 platform.
> - Validated NVME functionality with PCIe0 and PCIe1 on SA8775p platform.
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 5f9f0ff19baa..864548657551 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -49,7 +49,12 @@
>  #define PARF_LTSSM				0x1b0
>  #define PARF_SID_OFFSET				0x234
>  #define PARF_BDF_TRANSLATE_CFG			0x24c
> +#define PARF_DBI_BASE_ADDR_V2			0x350
> +#define PARF_DBI_BASE_ADDR_V2_HI		0x354
>  #define PARF_SLV_ADDR_SPACE_SIZE		0x358
> +#define PARF_SLV_ADDR_SPACE_SIZE_HI		0x35C
> +#define PARF_ATU_BASE_ADDR			0x634
> +#define PARF_ATU_BASE_ADDR_HI			0x638
>  #define PARF_NO_SNOOP_OVERIDE			0x3d4
>  #define PARF_DEVICE_TYPE			0x1000
>  #define PARF_BDF_TO_SID_TABLE_N			0x2000
> @@ -319,6 +324,33 @@ static void qcom_pcie_clear_hpc(struct dw_pcie *pci)
>  	dw_pcie_dbi_ro_wr_dis(pci);
>  }
>  
> +static void qcom_pcie_avoid_dbi_atu_mirroring(struct qcom_pcie *pcie)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	struct platform_device *pdev;
> +	struct resource *atu_res;
> +	struct resource *dbi_res;
> +
> +	pdev = to_platform_device(pci->dev);
> +	if (!pdev)
> +		return;
> +
> +	dbi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
> +	if (dbi_res) {
> +		writel(lower_32_bits(dbi_res->start), pcie->parf + PARF_DBI_BASE_ADDR_V2);
> +		writel(upper_32_bits(dbi_res->start), pcie->parf + PARF_DBI_BASE_ADDR_V2_HI);
> +	}
> +
> +	atu_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "atu");
> +	if (atu_res) {
> +		writel(lower_32_bits(atu_res->start), pcie->parf + PARF_ATU_BASE_ADDR);
> +		writel(upper_32_bits(atu_res->start), pcie->parf + PARF_ATU_BASE_ADDR_HI);
> +	}
> +

Above 2 resources are already fetched by dw_pcie_get_resources(). So we should
just store the phys addresses in 'struct dw_pcie' and make use of them here.

- Mani

> +	writel(lower_32_bits(U64_MAX), pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
> +	writel(upper_32_bits(U64_MAX), pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_HI);
> +}
> +
>  static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
>  {
>  	u32 val;
> @@ -623,8 +655,7 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
>  	val &= ~PHY_TEST_PWR_DOWN;
>  	writel(val, pcie->parf + PARF_PHY_CTRL);
>  
> -	/* change DBI base address */
> -	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
> +	qcom_pcie_avoid_dbi_atu_mirroring(pcie);
>  
>  	/* MAC PHY_POWERDOWN MUX DISABLE  */
>  	val = readl(pcie->parf + PARF_SYS_CTRL);
> @@ -900,6 +931,8 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
>  	/* Wait for reset to complete, required on SM8450 */
>  	usleep_range(1000, 1500);
>  
> +	qcom_pcie_avoid_dbi_atu_mirroring(pcie);
> +
>  	/* configure PCIe to RC mode */
>  	writel(DEVICE_TYPE_RC, pcie->parf + PARF_DEVICE_TYPE);
>  
> @@ -908,9 +941,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
>  	val &= ~PHY_TEST_PWR_DOWN;
>  	writel(val, pcie->parf + PARF_PHY_CTRL);
>  
> -	/* change DBI base address */
> -	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
> -
>  	/* MAC PHY_POWERDOWN MUX DISABLE  */
>  	val = readl(pcie->parf + PARF_SYS_CTRL);
>  	val &= ~MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN;
> -- 
> 2.25.1
> 

-- 
மணிவண�ணன� �தா�ிவம�




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux