On Wed, 19 Jun 2024 22:33:37 +0200, Caleb Connolly wrote:
> Add the missing iommus property on the first sdhc, and set a default
> mode for USB role switch. The iommus property in particular is necessary
> when running U-Boot as a first-stage bootloader, since it can't rely on
> EDK2 to configure the SMMU and crashes with:
>
> [020b9ed0d]TLB Dump Message:Not a valid memory address to dump TLBs for device APPS_TCU or no memory available.
> [020b9f533]SMMU GLOBAL TCU NON-SEC FAULT: bit mask=0x00002000
> [020b9fb23]SMMU:>> APPS_TCU NonSec Global Fault:
> [020b9ff9f] NSGFSR=0x80000002
> [020ba0404] NSGFAR=0x00000000bf6c6800
> [020ba0909] NSGFSYNR0=0x00000000
> [020ba0d1b] NSGFSYNR1=0x00c000c0
> [020ba117d] NSGFSYNR2=0x00000000
> [020ba15a9] NSCR0=0x00200406
>
> [...]
Applied, thanks!
[1/2] arm64: dts: qcom: sm6115: add iommu for sdhc_1
commit: 94ea124aeefe1ef271263f176634034e22c49311
Best regards,
--
Bjorn Andersson <andersson@xxxxxxxxxx>
