On 6/7/2024 3:00 PM, Konrad Dybcio wrote:
On 31.05.2024 12:22 PM, Taniya Das wrote:
On the QCM6490 boards the LPASS firmware controls the complete clock
controller functionalities. But the LPASS resets are required to be
controlled from the high level OS. The Audio SW driver should be able to
assert/deassert the audio resets as required. Thus in clock driver add
support for the same.
Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
---
Please stop ignoring my comments without responding.
https://lore.kernel.org/all/c1d07eff-4832-47d9-8598-aa6709b465ff@xxxxxxxxxx/
Sorry about that, it was not intentional. I had posted the v2 and
decided to split as it was delaying the other changes in the older
series which had more functional fixes.
Picking your comments from the old series.
---------------------------------
> - clk_zonda_pll_configure(&lpass_audio_cc_pll, regmap,
&lpass_audio_cc_pll_config);
> + if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-skip-pll")) {
Big no-no.
--------------------------------
Yes, I have already moved away from it and introduced a new probe to
support the subset of functionality on QCM6490.
------------------------
> + /* PLL settings */
> + regmap_write(regmap, 0x4, 0x3b);
> + regmap_write(regmap, 0x8, 0xff05);
Model these properly and use the abstracted clock (re)configuration
functions.
Add the unreachable clocks to `protected-clocks = <>` and make sure that the
aforementioned configure calls check if the PLL was really registered.
---------------------------
These were made for alignment of code, but existing approach was not
touched.
---------------------
> + lpass_audio_cc_sc7280_regmap_config.name = "lpassaudio_cc_reset";
Ugh.. are these really not contiguous, or were the register ranges
misrepresented from
the start?
> + lpass_audio_cc_sc7280_regmap_config.max_register = 0xc8;
Provide the real size of the block in .max_register instead, unconditionally
-----------------
This had a little history behind this approach. During the driver
development the ask was to avoid duplicating same descriptors and update
runtime what is possible. That is the reason to update it runtime. The
max register size is 0xC8 for resets functionality usage for High level OS.
Hope I was able to clarify your queries.
Konrad
--
Thanks & Regards,
Taniya Das.
