Re: [PATCH 10/12] arm64: dts: qcom: sm8650-mtp: connect USB-C SS port to QMP PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/04/2024 14:43, Dmitry Baryshkov wrote:
The lanes from the USB-C SS port are connected to the combo USB+DP QMP
PHY rather than the SS port of the USB controller. Move the connection
endpoint to the QMP PHY out port.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 10 +++++-----
  1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index d04ceaa73c2b..819f6eadba07 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -59,7 +59,7 @@ port@1 {
  					reg = <1>;
pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&usb_dp_qmpphy_out>;
  					};
  				};
  			};
@@ -853,10 +853,6 @@ &usb_1_dwc3_hs {
  	remote-endpoint = <&pmic_glink_hs_in>;
  };
-&usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
-};
-
  &usb_1_hsphy {
  	vdd-supply = <&vreg_l1i_0p88>;
  	vdda12-supply = <&vreg_l3i_1p2>;
@@ -873,6 +869,10 @@ &usb_dp_qmpphy {
  	status = "okay";
  };
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
  &xo_board {
  	clock-frequency = <76800000>;
  };


Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux