The lanes from the USB-C SS port are connected to the combo USB+DP QMP
PHY rather than the SS port of the USB controller. Move the connection
endpoint to the QMP PHY out port.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index d04ceaa73c2b..819f6eadba07 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -59,7 +59,7 @@ port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
- remote-endpoint = <&usb_1_dwc3_ss>;
+ remote-endpoint = <&usb_dp_qmpphy_out>;
};
};
};
@@ -853,10 +853,6 @@ &usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_1_dwc3_ss {
- remote-endpoint = <&pmic_glink_ss_in>;
-};
-
&usb_1_hsphy {
vdd-supply = <&vreg_l1i_0p88>;
vdda12-supply = <&vreg_l3i_1p2>;
@@ -873,6 +869,10 @@ &usb_dp_qmpphy {
status = "okay";
};
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
&xo_board {
clock-frequency = <76800000>;
};
--
2.39.2
