The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 1 -
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 ++
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 2 --
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 ++
4 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 44239d1e57e9..c52357214de5 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1373,7 +1373,6 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p92>;
- orientation-switch;
};
&usb_1_qmpphy_out {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d6c8c6c2eced..5580843e27b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3936,6 +3936,8 @@ usb_1_qmpphy: phy@88e8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 81e5577cccb7..895adce59e75 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -870,8 +870,6 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p88>;
-
- orientation-switch;
};
&usb_1_qmpphy_out {
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 24c42f285163..d67c19a59d5a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2256,6 +2256,8 @@ usb_1_qmpphy: phy@88e8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
status = "disabled";
ports {
--
2.39.2
