On 4/16/2024 8:09 PM, Konrad Dybcio wrote:
On 4/16/24 13:38, Luca Weiss wrote:
On Tue Apr 16, 2024 at 12:56 PM CEST, Viken Dadhaniya wrote:
Remove CTS and RTS pinctrl configuration for UART5 node as
it's designed for debug UART for all the board variants of the
sc7280 chipset.
Also change compatible string to debug UART.
This change has little to do with the SoC design though and is dependent
on the usage on a given board, right? Also the QCM6490 datasheet
mentions gpio21 & gpio22 can be used for UART_CTS and UART_RFR.
Yeah, using it as a debug uart doesn't rule out flow control I don't think
But at least consistency-wise this change makes sense, in practically
all other SoCs one UART is marked as geni-debug-uart.
But with this patch you should then also remove some overrides that are
placed in various boards already?
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts: compatible =
"qcom,geni-debug-uart";
arch/arm64/boot/dts/qcom/qcm6490-idp.dts: compatible =
"qcom,geni-debug-uart";
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts: compatible =
"qcom,geni-debug-uart";
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi: compatible =
"qcom,geni-debug-uart";
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi: compatible =
"qcom,geni-debug-uart";
Definitely
Updated in V2.
Konrad
