Remove CTS and RTS pinctrl configuration for UART5 node as
it's designed for debug UART for all the board variants of the
sc7280 chipset.
Also change compatible string to debug UART.
Fixes: 38cd93f413fd ("arm64: dts: qcom: sc7280: Update QUPv3 UART5 DT node")
Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 38c183b2bb26..2a6b4c4639d1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1440,12 +1440,12 @@
};
uart5: serial@994000 {
- compatible = "qcom,geni-uart";
+ compatible = "qcom,geni-debug-uart";
reg = <0 0x00994000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
pinctrl-names = "default";
- pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>;
+ pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7280_CX>;
operating-points-v2 = <&qup_opp_table>;
@@ -5397,16 +5397,6 @@
function = "qup04";
};
- qup_uart5_cts: qup-uart5-cts-state {
- pins = "gpio20";
- function = "qup05";
- };
-
- qup_uart5_rts: qup-uart5-rts-state {
- pins = "gpio21";
- function = "qup05";
- };
-
qup_uart5_tx: qup-uart5-tx-state {
pins = "gpio22";
function = "qup05";
--
2.17.1
