On SM6350 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350")
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/clk/qcom/dispcc-sm6350.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-sm6350.c b/drivers/clk/qcom/dispcc-sm6350.c
index 839435362010..e4b7464c4d0e 100644
--- a/drivers/clk/qcom/dispcc-sm6350.c
+++ b/drivers/clk/qcom/dispcc-sm6350.c
@@ -221,26 +221,17 @@ static struct clk_rcg2 disp_cc_mdss_dp_crypto_clk_src = {
},
};
-static const struct freq_tbl ftbl_disp_cc_mdss_dp_link_clk_src[] = {
- F(162000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(270000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(540000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(810000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- { }
-};
-
static struct clk_rcg2 disp_cc_mdss_dp_link_clk_src = {
.cmd_rcgr = 0x10f8,
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_0,
- .freq_tbl = ftbl_disp_cc_mdss_dp_link_clk_src,
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_dp_link_clk_src",
.parent_data = disp_cc_parent_data_0,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
--
2.39.2
