In the ethernet stmmac device driver:
- drivers/net/ethernet/stmicro/stmmac/
The "Strict priority" for the tx scheduler is by default in Linux driver,
so the tx-sched-sp property was removed in commit aed6864035b1 ("net:
stmmac: platform: Delete a redundant condition branch").
This patch series remove this property from the following device-tree
files:
- arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
- arch/arm64/boot/dts/freescale/imx8mp-evk.dts
- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
- arch/arm64/boot/dts/qcom/sa8540p-ride.dts
- arch/arm64/boot/dts/qcom/sa8775p-ride.dts
There is no problem if that property is still used in these DTS,
since, as seen above, it is a default property of the driver.
The property is also removed, in a separate patch, from the corresponding
dt_bindings file:
- Documentation/devicetree/bindings/net/snps,dwmac.yaml
v2 - This patch is the 2nd version of a previous patch, where both the DTS
and the yaml files were included toghether. Then I split this 1st
patch in two, as suggested by Krzysztof.
v1 - original version of the patch where, in addition to these DTS patches,
there was also the one related to the correspondent snps,dwmac.yaml
dt_binding file.
Flavio Suligoi (5):
arm64: dts: freescale: imx8mp-beacon: remove tx-sched-sp property
arm64: dts: freescale: imx8mp-evk: remove tx-sched-sp property
arm64: dts: freescale: imx8mp-verdin: remove tx-sched-sp property
arm64: dts: qcom: sa8540p-ride: remove tx-sched-sp property
arm64: dts: qcom: sa8775p-ride: remove tx-sched-sp property
arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi | 1 -
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 1 -
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 1 -
arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 2 --
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 2 --
5 files changed, 7 deletions(-)
--
2.34.1
