Currently, PLL0 is configured by the bootloader is the parent of the
mdp_clk_src. Reconfiguring it on probe leaves the PLL0 in "stand-by"
state (unlocked), which will trigger RCG child clocks to not update
their config, which then breaks eDP on all x1e80100 boards. So rely
on the bootloader for now. Drop the config values as well. Also add
a comment to explain why the PLL0 is not configured alongside PLL1.
Fixes: ee3f0739035f ("clk: qcom: Add dispcc clock driver for x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
drivers/clk/qcom/dispcc-x1e80100.c | 16 +---------------
1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-x1e80100.c b/drivers/clk/qcom/dispcc-x1e80100.c
index 0b2ee6456762..525f645094a8 100644
--- a/drivers/clk/qcom/dispcc-x1e80100.c
+++ b/drivers/clk/qcom/dispcc-x1e80100.c
@@ -73,20 +73,6 @@ static const struct pll_vco lucid_ole_vco[] = {
{ 249600000, 2300000000, 0 },
};
-static const struct alpha_pll_config disp_cc_pll0_config = {
- .l = 0xd,
- .alpha = 0x6492,
- .config_ctl_val = 0x20485699,
- .config_ctl_hi_val = 0x00182261,
- .config_ctl_hi1_val = 0x82aa299c,
- .test_ctl_val = 0x00000000,
- .test_ctl_hi_val = 0x00000003,
- .test_ctl_hi1_val = 0x00009000,
- .test_ctl_hi2_val = 0x00000034,
- .user_ctl_val = 0x00000000,
- .user_ctl_hi_val = 0x00000005,
-};
-
static struct clk_alpha_pll disp_cc_pll0 = {
.offset = 0x0,
.vco_table = lucid_ole_vco,
@@ -1670,7 +1656,7 @@ static int disp_cc_x1e80100_probe(struct platform_device *pdev)
goto err_put_rpm;
}
- clk_lucid_evo_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+ /* Configure only PLL1. PLL0 is already configured by bootloader */
clk_lucid_evo_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
/* Enable clock gating for MDP clocks */
---
base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
change-id: 20240418-x1e80100-dispcc-drop-pll0-reconfigure-0111b338c838
Best regards,
--
Abel Vesa <abel.vesa@xxxxxxxxxx>
