Both the CRD and the QCP have the data-lanes and the link-frequencies
for the DP3 in the wrong place. Both are properties of the out remote
endpoint. So move them to the mdss_dp3_out for each board.
Without these fixes, the eDP is broken on both boards.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Abel Vesa (3):
arm64: dts: qcom: x1e80100: Drop the link-frequencies from mdss_dp3_in
arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3
arm64: dts: qcom: x1e80100-qcp: Add data-lanes and link-frequencies to DP3
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 5 +++--
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 5 +++--
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1 -
3 files changed, 6 insertions(+), 5 deletions(-)
---
base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
change-id: 20240418-x1e80100-dts-fix-mdss-dp3-c2345ee3ee2f
Best regards,
--
Abel Vesa <abel.vesa@xxxxxxxxxx>
