On Fri, Apr 12, 2024 at 07:03:26PM +0000, Volodymyr Babchuk wrote:
> Voltage regulator L13C is used by SD card IO interface. In order to
> support UHS modes, IO interface voltage needs to be set to 1.8V. This
> patch extends minimum voltage range of L13C regulator to allow this.
>
I think this one also deserves a Fixes and stable tag. One could argue
that enabling UHS modes is a new "feature" but I would say the original
commit just missed setting the correct voltages with the intended use
case. I doubt limiting to high speed was intended.
Maybe also add a Suggested-by tag from myself:
Fixes: 0deb2624e2d0 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card")
Cc: stable@xxxxxxxxxxxxxxx
Suggested-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
I believe you do not need to resend just to add these tags, the b4 tool
should pick them up while applying. It looks like this might not work
for the Cc: stable tag though...
Thanks,
Stephan
> Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index b2cf2c988336c..9e9c7f81096bb 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -283,7 +283,7 @@ vreg_l12c_1p808: ldo12 {
>
> vreg_l13c_2p96: ldo13 {
> regulator-name = "vreg_l13c_2p96";
> - regulator-min-microvolt = <2504000>;
> + regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <2960000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
> --
> 2.44.0
