This patch fixes i2c lables to be inline with serial labels.
The reason to do this is that it would look odd if we add aliases in the
board file along with serial.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index fd4d49e..0073294 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -157,7 +157,7 @@
gsbi3: gsbi@16200000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
- i2c3: i2c@16280000 {
+ i2c@16280000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 394c43b..a7af35d 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -281,7 +281,7 @@
syscon-tcsr = <&tcsr>;
- i2c1: i2c@12460000 {
+ gsbi1_i2c: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
@@ -307,7 +307,7 @@
syscon-tcsr = <&tcsr>;
- i2c2: i2c@124a0000 {
+ gsbi2_i2c: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
interrupts = <0 196 IRQ_TYPE_NONE>;
@@ -328,7 +328,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- i2c3: i2c@16280000 {
+ gsbi3_i2c: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
