Hi Bjorn, Konrad, On Wed, 3 Apr 2024 at 10:04, Sumit Garg <sumit.garg@xxxxxxxxxx> wrote: > > Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge > Box Core board based on the Qualcomm APQ8016E SoC. For more information > refer to the product page [1]. > > One of the major difference from db410c is serial port where HMIBSC board > uses UART1 as the debug console with a default RS232 mode (UART1 mode mux > configured via gpio99 and gpio100). > > Support for Schneider Electric HMIBSC. Features: > - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) > - 1GiB RAM > - 8GiB eMMC, SD slot > - WiFi and Bluetooth > - 2x Host, 1x Device USB port > - HDMI > - Discrete TPM2 chip over SPI > - USB ethernet adaptors (soldered) > > This series is a v2 since v1 of this DTS file has been reviewed on the > U-Boot mailing list [2]. > > Changes in v5: > - Addressed another nitpick from Stephen. > - Collected Stephen's review tag. > - Warnings reported by Rob's DT check bot aren't related to HMIBSC > board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt > still not converted to YAML format. > I haven't seen any further comments on this series, can you help to pick it up? -Sumit > Changes in v4: > - Dropped IRQ_TYPE_EDGE_FALLING for pm8916_resin given the expectations > of Linux kernel driver. Instead depend on systemd workaround suggested > by Caleb to get expected HMIBSC reset behaviour. > - Incorporated further DT coding style comments from Stephen. > - Warnings reported by Rob's DT check bot aren't related to HMIBSC > board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt > still not converted to YAML format. > > Changes in v3: > - Picked up tags. > - Fixed further DT schema warnings. > - Configure resin/power button interrupt as falling edge. > - Incorporate DTS coding style comments from Krzysztof and Konrad. > > Changes in v2: > - Fix DT schema warnings. > - Incorporate suggestions from Stephan. > - Document UART1 mode GPIOs based mux. > > [1] https://www.se.com/us/en/product/HMIBSCEA53D1L0T/iiot-edge-box-core-harmony-ipc-emmc-dc-linux-tpm/ > [2] https://patchwork.ozlabs.org/project/uboot/patch/20240311111027.44577-6-sumit.garg@xxxxxxxxxx/ > > Sumit Garg (3): > dt-bindings: vendor-prefixes: Add Schneider Electric > dt-bindings: arm: qcom: Add Schneider Electric HMIBSC board > arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS > > .../devicetree/bindings/arm/qcom.yaml | 1 + > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/apq8016-schneider-hmibsc.dts | 491 ++++++++++++++++++ > 4 files changed, 495 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts > > -- > 2.34.1 >
