On Thu, Mar 28, 2024 at 09:17:32AM +0530, Manivannan Sadhasivam wrote: > On Wed, Mar 27, 2024 at 05:51:31PM +0100, Miquel Raynal wrote: > > Hi, > > > > ansuelsmth@xxxxxxxxx wrote on Wed, 27 Mar 2024 16:20:58 +0100: > > > > > On Tue, Mar 26, 2024 at 12:55:12PM +0530, Manivannan Sadhasivam wrote: > > > > On Mon, Mar 25, 2024 at 11:30:47AM +0100, Christian Marangi wrote: > > > > > misc_cmd_type in exec_op have multiple problems. With commit a82990c8a409 > > > > > ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") it was > > > > > reworked and generalized but actually broke the handling of the > > > > > ERASE_BLOCK command. > > > > > > > > > > Additional logic was added to the erase command cycle without clear > > > > > explaination causing the erase command to be broken on testing it on > > > > > a ipq806x nandc. > > > > > > > > > > Fix the erase command by reverting the additional logic and only adding > > > > > the NAND_DEV0_CFG0 additional call (required for erase command). > > > > > > > > > > Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") > > > > > Cc: stable@xxxxxxxxxxxxxxx > > > > > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> > > > > > --- > > > > > Changes v2: > > > > > - Split this and rework commit description and title > > > > > > > > > > drivers/mtd/nand/raw/qcom_nandc.c | 5 ++--- > > > > > 1 file changed, 2 insertions(+), 3 deletions(-) > > > > > > > > > > diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c > > > > > index b079605c84d3..19d76e345a49 100644 > > > > > --- a/drivers/mtd/nand/raw/qcom_nandc.c > > > > > +++ b/drivers/mtd/nand/raw/qcom_nandc.c > > > > > @@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub > > > > > nandc_set_reg(chip, NAND_EXEC_CMD, 1); > > > > > > > > > > write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL); > > > > > - (q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0, > > > > > - 2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc, > > > > > - NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); > > > > > + if (q_op.cmd_reg == OP_BLOCK_ERASE) > > > > > + write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL); > > > > > > > > So this only avoids the call to, 'read_reg_dma(nandc, NAND_FLASH_STATUS, 1, > > > > NAND_BAM_NEXT_SGL)' if q_op.cmd_reg != OP_BLOCK_ERASE. But for q_op.cmd_reg == > > > > OP_BLOCK_ERASE, the result is the same. > > > > > > > > I'm wondering how it results in fixing the OP_BLOCK_ERASE command. > > > > > > > > Can you share the actual issue that you are seeing? Like error logs etc... > > > > > > > > > > Issue is that nandc goes to ADM timeout as soon as a BLOCK_ERASE is > > > called. BLOCK_ERASE operation match also another operation from MTD > > > read. (parser also maps to other stuff) > > > > > > I will be away from the testing board for 7-10 days so I can't provide > > > logs currently. > > > > So, shall we wait for additional logs from Christian or shall I merge > > the two-patches series? I'm not sure what's the status anymore. > > > > TBH, I don't know how OP_BLOCK_ERASE can fail without this change. But I can > clearly see the 2 patches required for OP_RESET_DEVICE command. But merging the > patches as it is doesn't look good to me. > > So I think if Christian can club the two patches into 1 as like v1 and reword > the commit message and subject to reflect the fact that OP_RESET_DEVICE command > is being fixed would work for me. > Ok will do, very confusing and sorry for not providing additiona log. I was adding support for ipq806x for 6.6 and notice the regression. Will rework the patch. -- Ansuel