On 26.03.2024 2:34 PM, Gabor Juhos wrote: > According to ipq5018.dtsi, the maximum supported rate by the > CPU is 1.008 GHz on the IPQ5018 platform, however the current > configuration of the PLL results in 1.2 GHz rate. > > Change the 'L' value in the PLL configuration to limit the > rate to 1.008 GHz. The downstream kernel also uses the same > value [1]. Also add a comment to indicate the desired > frequency. > > [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151 > > Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") > Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad
