Re: [PATCH v16 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 26, 2024 at 01:41:52PM +0530, Krishna Kurapati PSSNV wrote:
> On 3/26/2024 1:15 AM, Johan Hovold wrote:
> 
> > Just change the logic in dwc3_qcom_find_num_ports() so that it returns 1
> > if "dp_hs_phy_1" is missing, and otherwise you determine the number of
> > ports by iterating from 2 to DWC3_MAX_PORTS - 1.

> I made this change and it works. Removed any return value check for the 
> find_num_ports call as it can return only 1/2/3/4 now.
> 
> ---
>      irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
>          if (irq > 0)
>                  return 1;
> 
>          irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
>          if (irq > 0)
>                  return 1;

As I mentioned above, these two lookups are no longer needed and should
be removed.
 
>          irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
>          if (irq <= 0)
>                  return 1;

Just assume it's a single port controller unless "dp_hs_phy_1" is
present.
 
>          for (port_index = 1; port_index < DWC3_MAX_PORTS - 1; 
> port_index++) {

I think this would be more readable if you use port (num) as iterator
(2..DWC3_MAX_PORTS) as you're returning a number of ports.

>                  sprintf(irq_name, "dp_hs_phy_%d", port_index + 1);

Then this would use just "port";

> 
>                  irq = platform_get_irq_byname_optional(pdev, irq_name);
>                  if (irq <= 0)
>                          return port_index;

And return "port - 1" here.

>          }
> 
>          return DWC3_MAX_PORTS;

Johan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux