Re: [PATCH v16 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/26/2024 1:15 AM, Johan Hovold wrote:

Just change the logic in dwc3_qcom_find_num_ports() so that it returns 1
if "dp_hs_phy_1" is missing, and otherwise you determine the number of
ports by iterating from 2 to DWC3_MAX_PORTS - 1.

Hi Johan,

I made this change and it works. Removed any return value check for the find_num_ports call as it can return only 1/2/3/4 now.

---
    irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
        if (irq > 0)
                return 1;

        irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
        if (irq > 0)
                return 1;

        irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
        if (irq <= 0)
                return 1;

for (port_index = 1; port_index < DWC3_MAX_PORTS - 1; port_index++) {
                sprintf(irq_name, "dp_hs_phy_%d", port_index + 1);

                irq = platform_get_irq_byname_optional(pdev, irq_name);
                if (irq <= 0)
                        return port_index;
        }

        return DWC3_MAX_PORTS;

---

Let me know if this is fine and I can push out v17.

Regards,
Krishna,




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux