Re: [PATCH 1/7] clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hi Johan,

2024. 03. 01. 10:40 keltezéssel, Johan Hovold írta:
> On Thu, Feb 29, 2024 at 07:07:46PM +0100, Gabor Juhos wrote:
>> The frequency table arrays are supposed to be terminated with an
>> empty element. Add such entry to the end of the arrays where it
>> is missing in order to avoid possible out-of-bound access when
>> the table is traversed by functions like qcom_find_freq() or
>> qcom_find_freq_floor().
>> Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
> Good find!
> Looks like these should be backported to the stable kernels as well so
> someone should add:
> Cc: stable@xxxxxxxxxxxxxxx
> to all patches except possibly the sc8280xp one (that camera clock
> controller was added in 6.8-rc1 so that patch does not need it in case
> you can these fixes in before 6.8 is released).

You are right maybe, although I did not find strong enough reasons for adding
the stable tags.

Only the changes of the gcc-ipq5018 driver has been tested on real hardware the
others are not. So those does not fit into the "It must be obviously correct and
tested." rule.

Since the support for the IPQ5018 platform is quite incomplete as several
drivers are missing even in 6.8-rc6, it is quite unlikely that anyone uses a
stable kernel for something serious on such boards. Hence backporting the
gcc-ipq5018 changes would not help too much in itself.


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux