There are 2 versions of QCA808x, one 2.5G capable and one 1G capable.
Currently, this matter only in the .get_features call however, it will
be required for filling supported interface modes so lets add a helper
that can be reused.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
drivers/net/phy/qcom/qca808x.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 2acf852fb4de..16c94e77646f 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -156,6 +156,20 @@ static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
}
+static bool qca808x_is_1g_only(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
+ if (ret < 0)
+ return true;
+
+ if (QCA808X_PHY_CHIP_TYPE_1G & ret)
+ return true;
+ else
+ return false;
+}
+
static int qca808x_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
@@ -350,11 +364,7 @@ static int qca808x_get_features(struct phy_device *phydev)
* existed in the bit0 of MMD1.21, we need to remove it manually if
* it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
*/
- ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
- if (ret < 0)
- return ret;
-
- if (QCA808X_PHY_CHIP_TYPE_1G & ret)
+ if (qca808x_is_1g_only(phydev))
linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
return 0;
--
2.43.2
