On 2/25/2024 11:02 PM, Gabor Juhos wrote:
The current register offset used for the GCC_UBI0_AXI_ARES reset
seems wrong. Or at least, the downstream driver uses [1] the same
offset which is used for other the GCC_UBI0_*_ARES resets.
Change the code to use the same offset used in the downstream
driver and also specify the reset bit explicitly to use the
same format as the followup entries.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L3773
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx>
---
drivers/clk/qcom/gcc-ipq5018.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c
index 5e81cfa77293a..e2bd54826a4ce 100644
--- a/drivers/clk/qcom/gcc-ipq5018.c
+++ b/drivers/clk/qcom/gcc-ipq5018.c
@@ -3632,7 +3632,7 @@ static const struct qcom_reset_map gcc_ipq5018_resets[] = {
[GCC_SYSTEM_NOC_BCR] = { 0x26000, 0 },
[GCC_TCSR_BCR] = { 0x28000, 0 },
[GCC_TLMM_BCR] = { 0x34000, 0 },
- [GCC_UBI0_AXI_ARES] = { 0x680},
+ [GCC_UBI0_AXI_ARES] = { 0x68010, 0 },
[GCC_UBI0_AHB_ARES] = { 0x68010, 1 },
[GCC_UBI0_NC_AXI_ARES] = { 0x68010, 2 },
[GCC_UBI0_DBG_ARES] = { 0x68010, 3 },
