Re: [PATCH 3/9] arm64: dts: qcom: sc7280: Enable MDP turbo mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 22 Feb 2024 at 01:19, Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> wrote:
>
> The max frequency listed in the DPU opp-table is 506MHz, this is not
> sufficient to drive a 4k@60 display, resulting in constant underrun.
>
> Add the missing MDP_CLK turbo frequency of 608MHz to the opp-table to
> fix this.

I think we might want to keep this disabled for ChromeOS devices. Doug?

>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index a19c278ebec9..a2a6717c6c87 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -4417,6 +4417,11 @@ opp-506666667 {
>                                                 opp-hz = /bits/ 64 <506666667>;
>                                                 required-opps = <&rpmhpd_opp_nom>;
>                                         };
> +
> +                                       opp-608000000 {
> +                                               opp-hz = /bits/ 64 <608000000>;
> +                                               required-opps = <&rpmhpd_opp_turbo>;
> +                                       };
>                                 };
>                         };
>
>
> --
> 2.25.1
>


-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux