Re: [PATCH v6 3/3] dt/bindings: qcom_nandc: Add DT bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 18, 2016 at 03:20:34PM +0530, Archit Taneja wrote:
> Add DT bindings document for the Qualcomm NAND controller driver.
> 
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Rob Herring <robh@xxxxxxxxxx>
> 
> Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
> ---
> v6:
>   - Update compatible tring to something more specific
>   - Refer to nand.txt for standard properties
>   - In the example, use 'partitions' node to hold the partition subnodes
> 
> v5:
> - Make changes to incorporate chip select sub nodes (brcmnand taken as
>   reference)
> 
> v3:
> - Don't use '0x' when specifying nand controller address space
> - Add optional property for on-flash bbt usage
> 
>  .../devicetree/bindings/mtd/qcom_nandc.txt         | 86 ++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

Acked-by: Rob Herring <robh@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux