Re: [PATCH v5 09/18] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 20, 2024 at 5:30 PM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Tue, 20 Feb 2024 at 13:16, Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
> >
> > On Mon, Feb 19, 2024 at 8:59 PM Mark Brown <broonie@xxxxxxxxxx> wrote:
> > >
> > > On Mon, Feb 19, 2024 at 07:48:20PM +0100, Bartosz Golaszewski wrote:
> > > > On Mon, Feb 19, 2024 at 7:03 PM Mark Brown <broonie@xxxxxxxxxx> wrote:
> > > > > On Fri, Feb 16, 2024 at 09:32:06PM +0100, Bartosz Golaszewski wrote:
> > >
> > > > > > +                     vreg_pmu_aon_0p59: ldo1 {
> > > > > > +                             regulator-name = "vreg_pmu_aon_0p59";
> > > > > > +                             regulator-min-microvolt = <540000>;
> > > > > > +                             regulator-max-microvolt = <840000>;
> > > > > > +                     };
> > >
> > > > > That's a *very* wide voltage range for a supply that's got a name ending
> >
> > Because it's an error, it should have been 640000. Thanks for spotting it.
>
> According to the datasheet, VDD08_PMU_AON_O goes up to 0.85V then down
> to 0.59V, which is the working voltage.
>

Hmm indeed this is what figure 3.4 says but table 3-2 says the maximum is 0.64V.

> VDD08_PMU_RFA_CMN is normally at 0.8V, but goes to 0.4V during sleep.
>

Again figure 3.4 and table 3-2 disagree unless I'm missing something.

Bart

[snip]





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux