[PATCH] arm64: dts: qcom: sm6115: fix USB PHY configuration

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

The patch adding Type-C support for sm6115 was misapplied. All the
orientation switch configuration ended up at the UFS PHY node instead of
the USB PHY node. Move the data bits to the correct place.

Fixes: a06a2f12f9e2 ("arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 42 ++++++++++++++--------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index ee65ab073ba6..b344f6f6d556 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -884,10 +884,31 @@ usb_qmpphy: phy@1615000 {
 			clock-output-names = "usb3_phy_pipe_clk_src";
 
 			#phy-cells = <0>;
+			orientation-switch;
 
 			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+			};
 		};
 
 		system_noc: interconnect@1880000 {
@@ -1213,29 +1234,8 @@ ufs_mem_phy: phy@4807000 {
 			reset-names = "ufsphy";
 
 			#phy-cells = <0>;
-			orientation-switch;
 
 			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					usb_qmpphy_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					usb_qmpphy_usb_ss_in: endpoint {
-						remote-endpoint = <&usb_dwc3_ss>;
-					};
-				};
-			};
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
-- 
2.39.2