On Thu, Feb 15, 2024 at 07:18:51PM +0530, Md Sadre Alam wrote: > This series of patches will add initial supports > for QPIC SPI NAND driver. > > Currently this driver support following commands > > -- RESET > -- READ ID > -- BLOCK ERASE > -- PAGE READ > -- PAGE WRITE > -- GET FEATURE > -- SET FEATURE > -- BAD BLOCK CHECK > > This driver has been tested with dd command with read/write page > with multiple file size 1MiB, 10MiB,40MiB etc. > Also tested with "mtd" command like mtd erase, mtd write, mtd verify etc. > This is not the first version isn't it? Where is the changelog describing what has changed since then? - Mani > Need help to test these all patches on SDX65 and SDX75 platform. > > Md Sadre Alam (5): > spi: dt-bindings: add binding doc for spi-qpic-snand > drivers: mtd: nand: Add qpic_common API file > spi: spi-qpic: Add qpic spi nand driver support > arm64: dts: qcom: ipq9574: Add SPI nand support > arm64: dts: qcom: ipq9574: Disable eMMC node > > .../bindings/spi/qcom,spi-qpic-snand.yaml | 82 ++ > .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 43 + > arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 2 +- > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 27 + > drivers/mtd/nand/Makefile | 1 + > drivers/mtd/nand/qpic_common.c | 794 +++++++++++ > drivers/mtd/nand/raw/qcom_nandc.c | 1226 +---------------- > drivers/spi/Kconfig | 9 + > drivers/spi/Makefile | 1 + > drivers/spi/spi-qpic-snand.c | 1025 ++++++++++++++ > include/linux/mtd/nand-qpic-common.h | 548 ++++++++ > 11 files changed, 2547 insertions(+), 1211 deletions(-) > create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml > create mode 100644 drivers/mtd/nand/qpic_common.c > create mode 100644 drivers/spi/spi-qpic-snand.c > create mode 100644 include/linux/mtd/nand-qpic-common.h > > -- > 2.34.1 > -- மணிவண்ணன் சதாசிவம்
