[PATCH 0/2] Add QCOM PBS driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the Qualcomm PBS (Programmable Boot Sequencer) driver. The QCOM PBS
driver supports configuring software PBS trigger events through PBS RAM
on Qualcomm Technologies, Inc (QTI) PMICs. 

QCOM PBS driver is needed to support LUT PPG. This is a new series to
separate PBS patches from the applied LUT PPG patch. Original comments
can be found here: 
https://lore.kernel.org/all/20231221185838.28440-1-quic_amelende@xxxxxxxxxxx/T/#m7ab7af4c59c6e1019721d01cb3696cb5ed708bda


Anjelique Melendez (2):
  dt-bindings: soc: qcom: Add qcom,pbs bindings
  soc: qcom: add QCOM PBS driver

 .../bindings/soc/qcom/qcom,pbs.yaml           |  46 ++++
 drivers/soc/qcom/Kconfig                      |   9 +
 drivers/soc/qcom/Makefile                     |   1 +
 drivers/soc/qcom/qcom-pbs.c                   | 236 ++++++++++++++++++
 include/linux/soc/qcom/qcom-pbs.h             |  30 +++
 5 files changed, 322 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,pbs.yaml
 create mode 100644 drivers/soc/qcom/qcom-pbs.c
 create mode 100644 include/linux/soc/qcom/qcom-pbs.h

-- 
2.41.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux