Re: [PATCH 1/3] arm64: dts: qcom: ipq6018: separate CPU OPP tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Dmitry
> Straight to the board files, please, no need for additional includes.

Is it possible to move the mp5496 node to mp5496.dtsi?
Because ipq9574 also uses this mp5496 pmic.

&rpm_requests {
	regulators {
		compatible = "qcom,rpm-mp5496-regulators";

		mp5496_s1: s1 {
			regulator-min-microvolt = <725000>;
			regulator-max-microvolt = <1075000>;
			status = "disabled";
		};

		mp5496_s2: s2 {
			regulator-min-microvolt = <725000>;
			regulator-max-microvolt = <1062500>;
			status = "disabled";
		};

		mp5496_l2: l2 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <3300000>;
			status = "disabled";
		};
	};
};

> From your patches I had the feeling that you still want to limit the
> high-frequency OPP entries if there is no PMIC.

Sorry for this misunderstanding, the cpu max frequency is determined
by the cpu_speed_bin. It's just that the efuse of the board I have
without pmic are all 1.2GHz.

Thanks,
Chukun

-- 
2.25.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux