Re: [PATCH v2 1/3] dt-binding: power: Add otg regulator binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 9, 2015 at 3:08 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Wed, Dec 9, 2015 at 1:59 PM, Bjorn Andersson
> <bjorn.andersson@xxxxxxxxxxxxxx> wrote:
>> On Wed 09 Dec 06:36 PST 2015, Rob Herring wrote:
>>
>>> On Wed, Dec 9, 2015 at 6:55 AM, Tim Bird <tim.bird@xxxxxxxxxxxxxx> wrote:
>>> > On 12/08/2015 08:11 PM, Rob Herring wrote:
>>> >> On Tue, Dec 08, 2015 at 04:40:16PM -0800, Tim Bird wrote:
>>> >>> Add a binding for the regulator which controls the OTG chargepath switch.
>>> >>> The OTG switch gets its power from pm8941_5vs1, and that should be
>>> >>> expressed as a usb-otg-in-supply property in the DT node for the
>>> >>> charger driver.  The regulator name is "otg".
>>>
>>> [...]
>>>
>>> >>> +child nodes:
>>> >>> +- otg:
>>> >>> +  Usage: optional
>>> >>> +  Description: This node defines a regulator used to control the direction
>>> >>> +               of VBUS voltage - specifically: whether to supply voltage
>>> >>> +               to VBUS for host mode operation of the OTG port, or allow
>>> >>> +               input voltage from external VBUS for charging.  In the
>>> >>> +               hardware, the supply for this regulator comes from
>>> >>> +               usb-otg-in-supply.
>>> >>
>>> >> Doesn't this regulator need to have a name defined?
>>> >
>>> > I'm not sure what you mean.  The regulator name is "otg", defined by the DT node
>>> > name. The code requires that the DT node name be "otg", and defines a regulator
>>> > with the same name.
>>> >
>>> > As far as I know, you have to define a DT label for the node, in order
>>> > to reference this regulator with a phandle.  Is that what you are referring to?
>>> > I usually use "chg_otg" as the label.  Are you asking that this be reflected
>>> > in the example?
>>>
>>> You need a regulator-name property. Also, should should define valid
>>> values for regulator-min-microvolt and regulator-max-microvolt.
>>>
>>
>> The regulator has a name, derived from the node name, and this is
>> significant. If the developer wants an additional human readable name
>> for some reason they can use the optional regulator-name property.
>>
>> The regulator is a simple switch and as such inherits voltage properties
>> from its supply. It should therefor not have any specified voltage
>> range.
>>
>>> Thinking about this some more, the node name should be generic, so
>>> just "regulator". The label does not need to be generic.
>>>
>>
>> The name of the node is significant, as it's used for matching the
>> regulator to an implementation.
>
> Ah yes, you are right. I forget what an oddball the regulator binding is.
>
> And if voltage switches don't need min and max properties, then it is
> fine as is. Still, the empty node with no properties seems odd to me.

Thinking some more about this, what bothers me is just having "otg
{};" gives no clue as to what the node is for w/o the documentation.
"otg" alone could mean several things. I think minimally, it needs
either a node name that gives some indication it is a regulator or
Vbus supply, a required regulator-name or even a comment.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux