The USB3 PHY on the MSM8998 platform doesn't have built-in
PCS_MISC_CLAMP_ENABLE register. Instead clamping is handled separately
via the register in the TCSR space. Declare corresponding register.
Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Cc: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 2793cc22d381..317a91d669f8 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1072,6 +1072,11 @@ tcsr_regs_1: syscon@1f60000 {
reg = <0x01f60000 0x20000>;
};
+ tcsr_regs_2: syscon@1fc0000 {
+ compatible = "qcom,msm8998-tcsr", "syscon";
+ reg = <0x01fc0000 0x26000>;
+ };
+
tlmm: pinctrl@3400000 {
compatible = "qcom,msm8998-pinctrl";
reg = <0x03400000 0xc00000>;
@@ -2174,6 +2179,8 @@ usb3phy: phy@c010000 {
reset-names = "phy",
"phy_phy";
+ qcom,tcsr-reg = <&tcsr_regs_2 0xb244>;
+
status = "disabled";
};
--
2.39.2
