From: Suraj Jaiswal <jsuraj@xxxxxxxxxxxxxxxx>
Add support to listen Ethernet HW common safery IRQ for correctable and
uncorrectable fault. The safety IRQ will be triggered for ECC(error
correction code), DPP(data path parity, FSM(finite state machine) error.
Changes since v9:
- prevent race condition of safety IRQ handling
Changes since v8:
- Use shared IRQ for sfty
- update error message
Changes since v7:
- Add support of common sfty irq on stmmac_request_irq_multi_msi.
- Remove uncecessary blank line.
Changes since v6:
- use name sfty_irq instead of safety_common_irq.
Changes since v5:
- Add description of ECC, DPP, FSM
Changes since v4:
- Fix DT_CHECKER warning
- use name safety for the IRQ.
Suraj Jaiswal (3):
dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for
sa8775p
arm64: dts: qcom: sa8775p: enable safety IRQ
net: stmmac: Add driver support for DWMAC5 common safety IRQ
.../devicetree/bindings/net/qcom,ethqos.yaml | 9 ++--
.../devicetree/bindings/net/snps,dwmac.yaml | 6 ++-
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 10 +++--
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 ++
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 41 ++++++++++++++++++-
.../ethernet/stmicro/stmmac/stmmac_platform.c | 8 ++++
7 files changed, 67 insertions(+), 11 deletions(-)
--
2.25.1
