On Tue, Jan 02, 2024 at 02:43:24PM +0100, Luca Weiss wrote:
> On Tue Jan 2, 2024 at 2:36 PM CET, Greg Kroah-Hartman wrote:
> > On Thu, Dec 21, 2023 at 02:45:26PM +0100, Luca Weiss wrote:
> > > On Thu Dec 21, 2023 at 1:53 PM CET, Konrad Dybcio wrote:
> > > > On 21.12.2023 11:34, Dmitry Baryshkov wrote:
> > > > > On Thu, 21 Dec 2023 at 09:33, Luca Weiss <luca.weiss@xxxxxxxxxxxxx> wrote:
> > > > >>
> > > > >> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote:
> > > > >>> On 20.12.2023 11:02, Luca Weiss wrote:
> > > > >>>> This series adds all the necessary bits to enable USB-C role switching,
> > > > >>>> charger and fuel gauge (all via pmic-glink) on Fairphone 5.
> > > > >>>>
> > > > >>>> One thing that could be made different is the pmic-glink compatible.
> > > > >>>> I've chosen to use qcm6490 compatible for it and not sc7280 since
> > > > >>>> there's plenty of firmware variety on sc7280-based platforms and they
> > > > >>>> might require different quirks in the future, so limit this PDOS quirk
> > > > >>>> to just qcm6490 for now.
> > > > >>>>
> > > > >>>> If someone thinks it should be qcom,sc7280-pmic-glink, please let me
> > > > >>>> know :)
> > > > >>> IMO it's best to continue using the "base soc" (which just so happened
> > > > >>> to fall onto sc7280 this time around) for all compatibles, unless the
> > > > >>> derivatives actually had changes
> > > > >>
> > > > >> Hi Konrad,
> > > > >>
> > > > >> I think at some point I asked Dmitry what he thought and he mentioned
> > > > >> qcm6490. Even found the message again:
> > > > >>
> > > > >>> well, since it is a firmware thing, you might want to emphasise that.
> > > > >>> So from my POV qcm6490 makes more sense
> > > > >>
> > > > >> But yeah since it's likely that sc7280 firmware behaves the same as
> > > > >> qcm6490 firmware it's probably okay to use sc7280 compatible, worst case
> > > > >> we change it later :) I'll send a v2 with those changes.
> > > > >
> > > > > Worst case we end up with sc7280 which has yet another slightly
> > > > > different UCSI / PMIC GLINK implementation, but the compatible string
> > > > > is already taken.
> > > > > I still suppose that this should be a qcm6490-related string.
> > > > Right, let's keep qcm then
> > >
> > > Ack from my side also. Thanks for the feedback!
> >
> > This doesn't apply to my tree, where should it be going through?
>
> As far as I can see the dependency for the driver commit 1d103d6af241
> ("usb: typec: ucsi: fix UCSI on buggy Qualcomm devices") was applied to
> Bjorn's qcom tree, so 2/3 should also go there then.
>
> Patch 3/3 (arm64 dts) definitely also Bjorn's qcom tree.
>
> So that leaves patch 1/3 which Bjorn can probably pick up as well but
> looking at git log you also picked up some for that file in the past,
> dunno.
Ok, for any remaining ones that want to be merged before 6.8-rc1 is out,
feel free to add my:
Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
If they don't get picked up by 6.8-rc1, feel free to rebase and send it
for me to take through my tree.
thanks,
greg k-h
