On Tue, 12 Dec 2023 19:51:50 +0800, Luo Jie wrote: > Update the yaml file for the new DTS properties. > > 1. cmn-reference-clock for the CMN PLL source clock select. > 2. clock-frequency for MDIO clock frequency config. > 3. add uniphy AHB & SYS GCC clocks. > 4. add reset-gpios for MDIO bus level reset. > > Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx> > --- > .../bindings/net/qcom,ipq4019-mdio.yaml | 157 +++++++++++++++++- > 1 file changed, 153 insertions(+), 4 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml: cmn-reference-clock: missing type definition doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231212115151.20016-6-quic_luoj@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
