+dt list On Wed, Nov 18, 2015 at 4:55 AM, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote: > Add additional property info needed for DSIv2 DT. Please use get_maintainers.pl. > Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt > index f344b9e..ca65a34 100644 > --- a/Documentation/devicetree/bindings/display/msm/dsi.txt > +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt > @@ -13,18 +13,25 @@ Required properties: > - power-domains: Should be <&mmcc MDSS_GDSC>. > - clocks: device clocks > See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. > -- clock-names: the following clocks are required: > +- clock-names: these vary based on the DSI version. For DSI6G: > * "bus_clk" > * "byte_clk" > + * "byte_clk_src This sounds like the parent of byte_clk. Is that really a clock within the block? > * "core_clk" > * "core_mmss_clk" > * "iface_clk" > * "mdp_core_clk" > * "pixel_clk" > + * "pixel_clk_src" > + For DSIv2, we need a few more: What is the overall order of clocks? As listed? > + * "dsi_clk_src" > + * "esc_clk_src" > + * "src_clk" > - vdd-supply: phandle to vdd regulator device node > - vddio-supply: phandle to vdd-io regulator device node > - vdda-supply: phandle to vdda regulator device node > - qcom,dsi-phy: phandle to DSI PHY device node > +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) > > Optional properties: > - panel@0: Node of panel connected to this DSI controller. > @@ -51,6 +58,7 @@ Required properties: > * "qcom,dsi-phy-28nm-hpm" > * "qcom,dsi-phy-28nm-lp" > * "qcom,dsi-phy-20nm" > + * "qcom,dsi-phy-28nm-8960" > - reg: Physical base address and length of the registers of PLL, PHY and PHY > regulator > - reg-names: The names of register regions. The following regions are required: > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > hosted by The Linux Foundation > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > http://lists.freedesktop.org/mailman/listinfo/dri-devel -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html