Hi Sneh, >---------------------------------------------------------------------- >SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx. >Update configure SGMII function with rx clk divider programming. > [Suman] You need to add the Fixes tag as well. >Signed-off-by: Sneh Shah <quic_snehshah@xxxxxxxxxxx> >--- > drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 3 +++ > 1 file changed, 3 insertions(+) > >diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c >b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c >index d3bf42d0fceb..f8c42e91a624 100644 >--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c >+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c >@@ -34,6 +34,7 @@ > #define RGMII_CONFIG_LOOPBACK_EN BIT(2) > #define RGMII_CONFIG_PROG_SWAP BIT(1) > #define RGMII_CONFIG_DDR_MODE BIT(0) >+#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10) > > /* SDCC_HC_REG_DLL_CONFIG fields */ > #define SDCC_DLL_CONFIG_DLL_RST BIT(30) >@@ -617,6 +618,8 @@ static int ethqos_configure_sgmii(struct qcom_ethqos >*ethqos) > case SPEED_10: > val |= ETHQOS_MAC_CTRL_PORT_SEL; > val &= ~ETHQOS_MAC_CTRL_SPEED_MODE; >+ rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR, BIT(10) | >+ GENMASK(15, 14), RGMII_IO_MACRO_CONFIG); > break; > } > >-- >2.17.1 >
