SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx. Update configure SGMII function with rx clk divider programming. Signed-off-by: Sneh Shah <quic_snehshah@xxxxxxxxxxx> --- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index d3bf42d0fceb..f8c42e91a624 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -34,6 +34,7 @@ #define RGMII_CONFIG_LOOPBACK_EN BIT(2) #define RGMII_CONFIG_PROG_SWAP BIT(1) #define RGMII_CONFIG_DDR_MODE BIT(0) +#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10) /* SDCC_HC_REG_DLL_CONFIG fields */ #define SDCC_DLL_CONFIG_DLL_RST BIT(30) @@ -617,6 +618,8 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos) case SPEED_10: val |= ETHQOS_MAC_CTRL_PORT_SEL; val &= ~ETHQOS_MAC_CTRL_SPEED_MODE; + rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR, BIT(10) | + GENMASK(15, 14), RGMII_IO_MACRO_CONFIG); break; } -- 2.17.1
