Re: [PATCH v3 2/6] dt-bindings: display/msm: Add reg bus and rotator interconnects

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/6/23 16:45, Neil Armstrong wrote:
Hi,

On 28/09/2023 13:35, Dmitry Baryshkov wrote:
From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there are
other connection paths:
- a path that connects rotator block to the DDR.
- a path that needs to be handled to ensure MDSS register access
   functions properly, namely the "reg bus", a.k.a the CPU-MDSS CFG
   interconnect.

Describe these paths bindings to allow using them in device trees and in
the driver

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  Documentation/devicetree/bindings/display/msm/mdss-common.yaml | 2 ++
  1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
index f69196e4cc76..6b4ce08a60dc 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -66,12 +66,14 @@ properties:
      items:
        - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
        - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
    interconnect-names:
      minItems: 1
      items:
        - const: mdp0-mem
        - const: mdp1-mem
+      - const: cpu-cfg
    resets:
      items:

This is not enough, on sm8450 this still appears with patch applied:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: display-subsystem@ae00000: interconnects: [[182, 14, 0, 30, 3, 0], [182, 14, 0, 30, 3, 0], [53, 2, 3, 183, 14, 3]] is too long
         from schema $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: display-subsystem@ae00000: interconnect-names: ['mdp0-mem', 'mdp1-mem', 'cpu-cfg'] is too long
         from schema $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
I assume this is with the path actually added in the dt, and
not just with this patch applied?

I guess increasing the numbers from the getgo would probably
be good idea too :)

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux