The pm8550ve can be found with a different SID on SM8650 platforms,
make it configurable.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8550ve.dtsi | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index c47646a467be..fbd8a386cef2 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -6,6 +6,11 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+/* (Sadly) this PMIC can be configured to be at different SIDs */
+#ifndef PMK8550VE_SID
+ #define PMK8550VE_SID 5
+#endif
+
/ {
thermal-zones {
pm8550ve-thermal {
@@ -33,16 +38,16 @@ trip1 {
&spmi_bus {
- pm8550ve: pmic@5 {
+ pm8550ve: pmic@PMK8550VE_SID {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
- reg = <0x5 SPMI_USID>;
+ reg = <PMK8550VE_SID SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550ve_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
- interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
--
2.34.1
