On 10/5/2023 12:38 AM, Robert Marko wrote:
On 22. 09. 2023. 13:51, Sricharan R wrote:
From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
IPQ5018 has tsens V1.0 IP with 4 sensors.
There is no RPM, so tsens has to be manually enabled. Adding the tsens
and nvmem node and IPQ5018 has 4 thermal sensors (zones). With the
critical temperature being 120'C and action is to reboot. Adding all
the 4 zones here.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
[v3] Ordered the qfprom device node properties as per
Krzysztof's comments
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 169 ++++++++++++++++++++++++++
1 file changed, 169 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcdfd5..9e28b54ebcbd 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -93,6 +93,117 @@ soc: soc@0 {
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ qfprom: qfprom@a0000 {
+ compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
Hi,
"qcom,ipq5018-qfprom" needs to be documented in QFPROM bindings first.
Already posted here [1]. Initially had it in the same series, but kept
it separately based on review comments.
[1] https://www.spinics.net/lists/devicetree/msg633408.html
Regards,
Sricharan
