Add device nodes for gpu, mdp and dsi blocks.
The gpu and dsi nodes are missing the 'power-domains' property needed
for configuring GDSC. This needs to be added when its available.
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 105 ++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index ac006e8..7807d77 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -391,6 +391,111 @@
interrupt-controller;
#interrupt-cells = <4>;
};
+
+ gpu: qcom,adreno-3xx@01c00000 {
+ compatible = "qcom,adreno-3xx";
+ #stream-id-cells = <16>;
+ reg = <0x01c00000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_NONE>;
+ interrupt-names = "kgsl_3d0_irq";
+ clocks =
+ <&gcc GCC_OXILI_GFX3D_CLK>,
+ <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_OXILI_GMEM_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_BIMC_GPU_CLK>,
+ <&gcc GFX3D_CLK_SRC>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "mem_clk",
+ "mem_iface_clk",
+ "alt_mem_iface_clk",
+ "gfx3d_clk_src";
+
+ qcom,chipid = <0x03000600>;
+ qcom,gpu-pwrlevels {
+ compatible = "qcom,gpu-pwrlevels";
+ qcom,gpu-pwrlevel@0 {
+ qcom,gpu-freq = <400000000>;
+ };
+ qcom,gpu-pwrlevel@1 {
+ qcom,gpu-freq = <19200000>;
+ };
+ };
+ };
+
+ mdss_mdp: qcom,mdss_mdp@1a00000 {
+ compatible = "qcom,mdss_mdp";
+ reg = <0x1a00000 0x90000>,
+ <0x1ac8000 0x3000>;
+ reg-names = "mdp_phys",
+ "vbif_phys";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_NONE>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ connectors = <&mdss_dsi0>;
+ gpus = <&gpu>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc MDP_CLK_SRC>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface_clk",
+ "bus_clk",
+ "core_clk_src",
+ "core_clk",
+ "vsync_clk";
+ };
+
+ mdss_dsi0: qcom,mdss_dsi@1a98000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ qcom,dsi-host-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+ interrupt-parent = <&mdss_mdp>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+
+ clocks = <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>,
+ <&gcc BYTE0_CLK_SRC>,
+ <&gcc PCLK0_CLK_SRC>;
+ clock-names = "mdp_core_clk",
+ "iface_clk",
+ "bus_clk",
+ "byte_clk",
+ "pixel_clk",
+ "core_clk",
+ "byte_clk_src",
+ "pixel_clk_src";
+ qcom,dsi-phy = <&mdss_dsi_phy0>;
+ status = "disabled";
+ };
+
+ mdss_dsi_phy0: qcom,mdss_dsi_phy@1a98300 {
+ compatible = "qcom,dsi-phy-28nm-lp";
+ qcom,dsi-phy-index = <0>;
+ reg = <0x1a98300 0xd4>,
+ <0x1a98500 0x280>,
+ <0x1a98780 0x30>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>;
+ clock-names = "iface_clk";
+ status = "disabled";
+ };
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
