Re: [PATCH v5 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 28 Sep 2023, Anjelique Melendez wrote:

> Update the pmi632 lpg_data struct so that pmi632 devices use PPG
> for LUT pattern.
> 
> Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
> ---
>  drivers/leds/rgb/leds-qcom-lpg.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)

Reviewed-by: Lee Jones <lee@xxxxxxxxxx>

> diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> index 4d87686f916c..a6cea6bd7167 100644
> --- a/drivers/leds/rgb/leds-qcom-lpg.c
> +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> @@ -1660,11 +1660,13 @@ static const struct lpg_data pm8994_lpg_data = {
>  static const struct lpg_data pmi632_lpg_data = {
>  	.triled_base = 0xd000,
>  
> +	.lut_size = 64,
> +
>  	.num_channels = 5,
>  	.channels = (const struct lpg_channel_data[]) {
> -		{ .base = 0xb300, .triled_mask = BIT(7) },
> -		{ .base = 0xb400, .triled_mask = BIT(6) },
> -		{ .base = 0xb500, .triled_mask = BIT(5) },
> +		{ .base = 0xb300, .triled_mask = BIT(7), .sdam_offset = 0x48 },
> +		{ .base = 0xb400, .triled_mask = BIT(6), .sdam_offset = 0x56 },
> +		{ .base = 0xb500, .triled_mask = BIT(5), .sdam_offset = 0x64 },
>  		{ .base = 0xb600 },
>  		{ .base = 0xb700 },
>  	},
> -- 
> 2.41.0
> 

-- 
Lee Jones [李琼斯]



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux