Update the pmi632 lpg_data struct so that pmi632 devices use PPG
for LUT pattern.
Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
---
drivers/leds/rgb/leds-qcom-lpg.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 4d87686f916c..a6cea6bd7167 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -1660,11 +1660,13 @@ static const struct lpg_data pm8994_lpg_data = {
static const struct lpg_data pmi632_lpg_data = {
.triled_base = 0xd000,
+ .lut_size = 64,
+
.num_channels = 5,
.channels = (const struct lpg_channel_data[]) {
- { .base = 0xb300, .triled_mask = BIT(7) },
- { .base = 0xb400, .triled_mask = BIT(6) },
- { .base = 0xb500, .triled_mask = BIT(5) },
+ { .base = 0xb300, .triled_mask = BIT(7), .sdam_offset = 0x48 },
+ { .base = 0xb400, .triled_mask = BIT(6), .sdam_offset = 0x56 },
+ { .base = 0xb500, .triled_mask = BIT(5), .sdam_offset = 0x64 },
{ .base = 0xb600 },
{ .base = 0xb700 },
},
--
2.41.0
