[PATCH 2/4] dt-bindings: thermal: Add qcom,qmi-cooling yaml bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The cooling subnode of a remoteproc represents a client of the Thermal
Mitigation Device QMI service running on it. Each subnode of the cooling
node represents a single control exposed by the service.

Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
 .../bindings/remoteproc/qcom,msm8996-mss-pil.yaml  |  13 ++
 .../bindings/remoteproc/qcom,pas-common.yaml       |   6 +
 .../bindings/thermal/qcom,qmi-cooling.yaml         | 168 +++++++++++++++++++++
 3 files changed, 187 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
index 0643faae2c39..9d0398764a31 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
@@ -145,6 +145,12 @@ properties:
       and devices related to the Modem.
     unevaluatedProperties: false
 
+  cooling:
+    $ref: /schemas/thermal/qcom,qmi-cooling.yaml#
+    description:
+      Cooling subnode which represents the cooling devices exposed by the Modem.
+    unevaluatedProperties: false
+
   # Deprecated properties
   mba:
     type: object
@@ -386,6 +392,13 @@ examples:
         qcom,smem-states = <&modem_smp2p_out 0>;
         qcom,smem-state-names = "stop";
 
+        cooling {
+            vdd {
+              label = "cpuv_restriction_cold";
+              #cooling-cells = <2>;
+            };
+        };
+
         glink-edge {
             interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
             label = "modem";
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
index 63a82e7a8bf8..bbc82253f76b 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
@@ -77,6 +77,12 @@ properties:
       and devices related to the ADSP.
     unevaluatedProperties: false
 
+  cooling:
+    $ref: /schemas/thermal/qcom,qmi-cooling.yaml#
+    description:
+      Cooling subnode which represents the cooling devices exposed by the Modem.
+    unevaluatedProperties: false
+
 required:
   - clocks
   - clock-names
diff --git a/Documentation/devicetree/bindings/thermal/qcom,qmi-cooling.yaml b/Documentation/devicetree/bindings/thermal/qcom,qmi-cooling.yaml
new file mode 100644
index 000000000000..65b1c7b40c1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom,qmi-cooling.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 (c), Linaro Limited
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,qmi-cooling.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMI based thermal mitigation (TMD) cooling devices.
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@xxxxxxxxxx>
+
+description:
+  Qualcomm QMI based TMD cooling device(s) are used for various mitigations for
+  remote subsystem(s) including remote processor mitigation, rail voltage
+  restriction etc. Some devices such as "cpuv_restriction_cold" are for warming,
+  (e.g. by raising minimum voltage on core system rails).
+
+  Each subnode represents a control for a single instance of the TMD service running
+  on a remote subsystem.
+
+definitions:
+  tmd:
+    type: object
+    description: |
+      A single Thermal Mitigation Device exposed by a remote subsystem.
+    properties:
+      label:
+        maxItems: 1
+      "#cooling-cells":
+        $ref: /schemas/thermal/thermal-cooling-devices.yaml#/properties/#cooling-cells
+
+    required:
+      - label
+      - "#cooling-cells"
+
+    additionalProperties: false
+
+properties:
+  compatible:
+    enum:
+      - qcom,qmi-cooling-modem
+      - qcom,qmi-cooling-adsp
+      - qcom,qmi-cooling-cdsp
+      - qcom,qmi-cooling-slpi
+
+  vdd:
+    $ref: "#/definitions/tmd"
+    description:
+      Restrict primary rail minimum voltage to "nominal" setting.
+    properties:
+      label:
+        const: cpuv_restriction_cold
+
+required:
+  - compatible
+  - vdd
+
+# Modem has additional TMDs
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,qmi-cooling-modem
+    then:
+      properties:
+        pa:
+          $ref: "#/definitions/tmd"
+          description:
+            Power Amplifier TMD
+          properties:
+            label:
+              const: pa
+
+        proc:
+          $ref: "#/definitions/tmd"
+          description:
+            Modem processor temperature TMD
+          properties:
+            label:
+              const: modem
+
+        current:
+          $ref: "#/definitions/tmd"
+          description:
+            Modem peak current TMD
+          properties:
+            label:
+              const: modem_current
+
+        skin:
+          $ref: "#/definitions/tmd"
+          description:
+            Modem skin temperature TMD
+          properties:
+            label:
+              const: modem_skin
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    remoteproc-modem {
+        cooling {
+            compatible = "qcom,qmi-cooling-modem";
+
+            modem_pa: pa {
+              label = "pa";
+              #cooling-cells = <2>;
+            };
+
+            modem_proc: proc {
+              label = "modem";
+              #cooling-cells = <2>;
+            };
+
+            modem_current: current {
+              label = "modem_current";
+              #cooling-cells = <2>;
+            };
+
+            modem_skin: skin {
+              label = "modem_skin";
+              #cooling-cells = <2>;
+            };
+
+            modem_vdd: vdd {
+              label = "cpuv_restriction_cold";
+              #cooling-cells = <2>;
+            };
+        };
+    };
+
+    remoteproc-adsp {
+        cooling {
+            compatible = "qcom,qmi-cooling-adsp";
+
+            adsp_vdd: vdd {
+              label = "cpuv_restriction_cold";
+              #cooling-cells = <2>;
+            };
+        };
+    };
+
+    remoteproc-cdsp {
+        cooling {
+            compatible = "qcom,qmi-cooling-cdsp";
+
+            cdsp_vdd: vdd {
+              label = "cpuv_restriction_cold";
+              #cooling-cells = <2>;
+            };
+        };
+    };
+
+    remoteproc-slpi {
+        cooling {
+            compatible = "qcom,qmi-cooling-slpi";
+
+            slpi_vdd: vdd {
+              label = "cpuv_restriction_cold";
+              #cooling-cells = <2>;
+            };
+        };
+    };
+...

-- 
2.42.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux