[PATCH v3 4/5] arm64: dts: qcom: add uart console support for SM4450

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add base description of UART and TLMM nodes which helps SM4450
boot to shell with console on boards with this SoC.

Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm4450-qrd.dts | 18 ++++++++-
 arch/arm64/boot/dts/qcom/sm4450.dtsi    | 50 ++++++++++++++++++++++++-
 2 files changed, 65 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
index 00a1c81ca397..0f253a2ba170 100644
--- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -10,9 +10,23 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <136 1>;
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index c27f17a41699..727d6f7cf220 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -364,6 +364,29 @@
 				 <0>;
 		};
 
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -380,6 +403,32 @@
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm4450-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 137>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio23";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio22";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
@@ -476,7 +525,6 @@
 				clocks = <&xo_board>;
 			};
 		};
-
 	};
 
 	timer {
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux